The Great Western Railway (GWR) 3000 Class was a class of 2-8-0 steam locomotive consisting of the ex-Railway Operating Division ROD 2-8-0. These were built by North British Locomotive Co. between 1917-1918. No examples have been preserved.

GWR 3000 Class
GWR No. 3043 at Seer Green 1950
Type and origin Power type Steam Build date 1917-1918 (built for the ROD) 1919-1925 (purchased) Total produced 100
Specifications Configuration: ​  • Whyte 2-8-0 Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Leading dia. 3 ft 6 in (1.067 m) Driver dia. 4 ft 8 in (1.422 m) Length 61 ft 9 in (18.82 m) Width 8 ft 9+1⁄2 in (2.680 m) Height 13 ft 5+1⁄4 in (4.096 m) Axle load 17 long tons 2 cwt (38,300 lb or 17.4 t) (17.4 t; 19.2 short tons) full Adhesive weight 66 long tons 8 cwt (148,700 lb or 67.5 t) (67.5 t; 74.4 short tons) full Loco weight 73 long tons 11 cwt (164,800 lb or 74.7 t) (74.7 t; 82.4 short tons) full Fuel type Coal Water cap. 4,000 imp gal (18,000 l; 4,800 US gal) Firebox:  • Firegrate area 26.07 sq ft (2.422 m2) Boiler pressure 185 lbf/in2 (1.28 MPa) Heating surface:  • Tubes 1,591.38 sq ft (147.844 m2)  • Firebox 153.19 sq ft (14.232 m2) Superheater: ​  • Type 6-element  • Heating area 6-element: 225.12 sq ft (20.914 m2) Cylinders Two, outside Cylinder size 21 in × 26 in (533 mm × 660 mm)
Performance figures Tractive effort 32,197 lbf (143.22 kN)
Career Operators GWR » BR Numbers 3000-3099, 6000-6003 Withdrawn 1929-1958 Disposition All Scrapped

The GWR borrowed several ROD 2-8-0s during the First World War but these were returned to the government after the end of the war. In 1919, GWR bought 20 virtually new RODs, and numbered them 3000-19. A further 84 were hired in July 1919, and were numbered 3020-99 and 6000-3, but these were returned in October 1922. In 1925, the GWR bought 80 engines (including some previously hired) and numbered them 3020-99.

Overhaul and sorting

In 1926/7 the GWR sorted the eighty RODs bought in 1925 which had been given nos. 3020–99 into two batches, which involved considerable renumbering. The worst fifty were touched up and returned to traffic with steel fireboxes and painted the original R.O.D. black and renumbered 3050–99;[1] they were run until they failed, when they were withdrawn – after July 1930, only one remained, being withdrawn the following year.[2] The best thirty were thoroughly overhauled, fitted with copper fireboxes and painted G.W. standard green,[1] they also acquired Swindon fittings, including top feed and brass safety valve casing, and were renumbered 3020–49. Nos. 3000–19 (bought 1919) were also overhauled similarly to the new nos. 3020–49 between 1927 and 1929, but were not further renumbered.[2] The leading dimensions of the GWR 3000 Class were the same as the GCR Class 8K except that the GWR increased the boiler pressure to 185 psi (1,280 kPa) which increased the tractive effort from 31,327 lb (14,210 kg) to 32,197 lbf (143,220 N).

World War II

The GWR borrowed 30 Class O4 from the LNER in 1940 but returned them between 1941 and 1943.

British Railways

Forty-six of the RODs entered British Railways service in 1948. Five locomotives (numbers 3011, 3015, 3024, 3036 and 3041) were still in service in 1957[3]^{[page needed]} but they had all withdrawn and scrapped by 1960.[4]^{[page needed]} None of the GWR RODs has survived to preservation.

Modelling

In November 2011, Bachmann released a 00 gauge ready to run model of the 3000 class. This complements kits in various gauges.

References

• Davies, F.K.; Firth, J.M.; Lucking, J.H.; Thomas, R.E.; Allcock, N.J.; Sterndale, A.C.; Barrie, D.S.M.; Reed, P.J.T.; Mountford, E.R. (April 1966). White, D.E. (ed.). The Locomotives of the Great Western Railway, part ten: Absorbed Engines, 1922-1947. RCTS. ISBN 0-901115-20-7.
• Whitehurst, Brian (1973). Great Western engines, names, numbers, types, classes: 1940 to preservation. Oxford: Oxford Pub. Co. ISBN 0902888218.

External links

Wikimedia Commons has media related to GWR 3000 Class.

• Class ROD Details at Rail UK