railroad.wikisort.org - Train

The Würtemberg I was a class of tender locomotives of the Royal Württemberg State Railways (Königlich Württembergischen Staats-Eisenbahnen, K.W.St.E). They were their first locomotives.

Württemberg I
Type and origin Power type Steam Builder Norris Locomotive Works Build date 1845 Total produced 3
Specifications Configuration: ​  • UIC 2′B n2 Gauge 1,435 mm (4 ft 8+1⁄2 in) Leading dia. c. 800 mm (31+1⁄2 in) Driver dia. 1,530 mm (60+1⁄4 in) Length c. 10.63 m (34 ft 10+1⁄2 in) Adhesive weight 10 tonnes (9.8 long tons; 11 short tons) Loco weight 16 tonnes (16 long tons; 18 short tons) Firebox:  • Firegrate area 0.87 m2 (9.4 sq ft) Boiler pressure 6.3 kgf/cm2 (620 kPa; 90 psi) Heating surface c. 60 m2 (650 sq ft) Cylinders Two, outside Cylinder size 318 mm × 635 mm (12+1⁄2 in × 25 in)
Career Operators Royal Württemberg State Railways Numbers 1 – 3 Withdrawn 1870s

Development

The three locomotives were of the 4-4-0 wheel arrangement and were manufactured by the Norris Locomotive Works in Philadelphia. They had a round-topped firebox, which sat between the two pairs of driving wheels. The two outside cylinders were mounted at front of the boiler, at the height of the front axle.

The open cab was level with the outer edge of the frame and was therefore rather narrow. The wheel arch for the rear driving wheels also protruded into the cab. The locomotives were rebuilt during their service lives and were withdrawn in 1861.

Fleet list

Year	K.W.St.E. fleet number	Name	Withdrawn
1845	1	Donau	1861
1845	2	Fils	1861
1845	3	Jagst	1861

References

• Spielhoff, Lothar (1995). Deutsche Eisenbahnen, Band 2: Länderbahn-Dampflokomotiven: Baden, Bayern, Pfalz und Württemberg (in German). Augsburg: Weltbild Verlag. p. 142. ISBN 3-89350-819-8.

На других языках

---

[de] Württembergische I

Die Lokomotiven der späteren Gattung I waren zusammen mit der II die ersten Dampflokomotiven der Königlich Württembergischen Staats-Eisenbahnen (KWStE).

---

- [en] Württemberg I

---

---