Great Smoky Mountains Railroad 1702 is an S160 class 2-8-0 "Consolidation" type steam locomotive built in September 1942 by the Baldwin Locomotive Works in Philadelphia, Pennsylvania, originally for the U.S. Army Transportation Corps during World War II. After the war ended, the No. 1702 locomotive worked on three different railroads in Arkansas and Nebraska.
Preserved 2-8-0 steam locomotive, based in North Carolina
Great Smoky Mountains Railroad 1702
GSMR No. 1702 at Bryson City, North Carolina, awaiting to depart for the Nantahala Outdoor Center on June 18, 2022
Type and origin
Power type
Steam
Designer
Major J. W. Marsh
Builder
Baldwin Locomotive Works
Serial number
64641
Build date
September 1942
Rebuild date
2014–2016
Specifications
Configuration:
•Whyte
2-8-0
•UIC
1′D h2
Gauge
4ft8+1⁄2in (1,435mm)
Leading dia.
2ft 9in (838mm)
Driver dia.
4ft 9in (1,448mm)
Wheelbase
51ft 7+3⁄4in (15.74m)
Adhesive weight
140,000lb (63,503kg)
Loco weight
161,000lb (73,028kg)
Fuel type
No. 4 fuel oil, formerly coal
Fuel capacity
Old tender: 1,800USgal (6,800l; 1,500impgal) of oil, formerly 10t (9.8 long tons; 11 short tons) of coal New tender: 3,600USgal (14,000l; 3,000impgal) of oil
Water cap.
Old tender: 6,500USgal (25,000l; 5,400impgal) New tender: 10,000USgal (38,000l; 8,300impgal)
Firebox: •Firegrate area
41sqft (3.8m2)
Boiler
5ft 10in (1.78m) maximum diameter
Boiler pressure
225psi (1.55MPa)
Heating surface
2,253sqft (209.3m2)
•Tubes
1,055sqft (98.0m2) (150in or 3,810mm long × 2in or 51mm diameter)
•Flues
567sqft (52.7m2) (30in or 762mm long × 5.375in or 137mm diameter)
•Firebox
136sqft (12.6m2)
Superheater:
•Type
Type A
•Heating area
313sqft (29.1m2)
Cylinders
Two, outside
Cylinder size
19in ×26in (482.6mm ×660.4mm) bore x stroke
Valve gear
Walschaerts
Valve type
10 inches (254mm) piston valves
Performance figures
Maximum speed
45mph (72km/h)
Tractive effort
31,500lbf (140.1kN)
Factor of adh.
4.45
Career
Operators
U.S. Army (1942-1945) Warren and Saline River Railroad (1946–1961) Reader Railroad (1964–1972) Fremont and Elkhorn Valley Railroad (1985–1991) Great Smoky Mountains Railroad (1992–present)
In late 1991, the No. 1702 locomotive was purchased by the Great Smoky Mountains Railroad (GSMR) in Bryson City, North Carolina, where it hauled tourist train excursions on the half of the former Southern Railway Murphy Branch, which spans 53 miles (85 kilometers) of track between Dillsboro and Nantahala, North Carolina. In 2005, the No. 1702 locomotive went out of service due to firebox issues but was later restored back to operating condition ten years later and returned to service in 2016. It is currently one of twenty-six S160 steam locomotives preserved in the United States and abroad.
History
No. 1702 leads a special photo charter excursion just a few miles east of Whittier, North Carolina, on September 8, 2017
No. 1702 is an S160 steam locomotive built in September 1942 by the Baldwin Locomotive Works in Philadelphia, Pennsylvania, originally for the U.S. Army Transportation Corps, where it was stationed for training purposes at the Fort Bragg military base in Fayetteville, North Carolina during World War II.[1][2] In 1946, a year after the war ended, the No. 1702 locomotive was sold to the Warren and Saline River Railroad (WSR) in Warren, Arkansas, where it was assigned to haul lumber trains.[1][2][3] Additionally, its firebox was modified to burn fuel oil as opposed to coal.[1]
When the WSR was dieselized in 1961, the No. 1702 locomotive was sold to the Reader Railroad (RERX) in Hot Springs, Arkansas in 1964, where it was given a new tender that was originally used behind a Rock Island steam locomotive and holds 3,600 US gallons (14,000l) of fuel and 10,000 US gallons (38,000l) of water.[1][4] Afterwards, the No. 1702 locomotive served tourist operations on the RERX.[1] In 1985, it was sold again to the Fremont and Elkhorn Valley Railroad (FEVR) in Fremont, Nebraska, where the No. 1702 locomotive ran tourist trains on the former Chicago and North Western line between Fremont and Hooper, Nebraska.[5]
In late 1991, the No. 1702 locomotive was purchased by the Great Smoky Mountains Railroad (GSMR) in Bryson City, North Carolina, where it was significantly altered with a taller smokestack, a larger sand dome, and a wider cab to resemble a typical American steam locomotive.[1][4] Afterwards, in 1992, the GSMR operated the No. 1702 locomotive with the Nantahala Gorge and Tuckasegee River tourist excursions on the half of the former Southern Railway Murphy Branch, which spans 53 miles (85 kilometers) of track between Dillsboro and Nantahala, North Carolina.[6][7] When working on these excursions, No. 1702 uses 400 US gallons (1,500l) of fuel and 3,500 US gallons (13,000l) of water every round trip.[1]
In 2005, the No. 1702 locomotive was sidelined due to firebox issues and became disassembled outside the GSMR's workshop area in Dillsboro, North Carolina, exposed to the elements.[8] In April 2012, the GSMR made an agreement with the Swain County of North Carolina donating $700,000 to construct a new steam locomotive workshop for the restoration of No. 1702 and installing a new turntable in Bryson City for the locomotive to be turned around.[9] Afterwards, the restoration work of No. 1702 began in May 2014 and completed on July 21, 2016 with the locomotive beginning its inaugural excursion run five days later.[10][lower-alpha 1]
Lewis, Edward A. (1991). American Shortline Railway Guide: Facts, Figures, and Locomotive Rosters for over 500 Short Lines (4thed.). Kalmbach Media. p.273. ISBN0-89024-109-0.
Другой контент может иметь иную лицензию. Перед использованием материалов сайта WikiSort.org внимательно изучите правила лицензирования конкретных элементов наполнения сайта.
2019-2025 WikiSort.org - проект по пересортировке и дополнению контента Википедии